Aimpoint QRP Quick Release Mount for Picatinny Rails (MILSTD 1913) (Aimpoint Part 11884)

(This was formerly Aimpoint Part Number 0568059 -- it has been given a new part number 11884 -- sme item, new part number).

The Aimpoint QRP Quick Release mount is the standard Aimpoint mount for the CompM2, CompML2, CompM3, and CompML3 sights, and is the standard sight used by the military. This is a good all around mount.

This mount supports the Aimpoint rubber bikini sight covers.

The QRP spacer is required on AR15 flat-tops and M4 Carbine style rifles that do not have auxiliary rails attached to the top of the receiver. This spacer aligns the Aimpoint sight correctly so that the rifle's backup iron sights and front sight posts co-witness correctly through the Aimpoint sight.

Aimpoint M-16 Forward Mount for M-16/AR-15 with Fixed Carry Handle

The Aimpoint Forward Mount allows the mounting of an M-Series Aimpoint Sight, using the QRP Quick Release Mount, on an M-16/Ar-15 family rifle or carbine that has a fixed carry handle (ie, not a flat top or a flat top with a removable carry handle affixed). The Forward Mount provides a rail out over the handguard that the QRP mounts to. The Forward Mount does not obstruct the built in iron sights of the rifle, and in fact, allows the iron sights to co-witness with the Aimpoint. The Forward Mount cannot be used alone -- it must be used to gether with the QRP Mount. As shown at left, the Forward Mount allows the mounting of the Aimpoint with QRP Mount out over the handguard. Rifle, QRP Mount, and Aimpoint Sight, while shown, are not included. Does not require the QRP spacer.

Aimpoint QRW Quick Release Mount for Weaver Rails

The Aimpoint QRW Quick Release mount is the standard Aimpoint mount for firearms with Weaver Rail systems for the CompM2, CompML2, CompM3, and CompML3 sights. It is the same as the QRP, which is for Picatinny Rail systems and used by the military. This is a good all around mount.

This mount supports the Aimpoint rubber bikini sight covers.

The QRP/QRW spacer is available for those firearms that need extra height to align the Aimpoint sight correctly so that the rifle's iron sights co-witness correctly through the Aimpoint sight.

A.R.M.S. #22M68 Throw Lever Ring For Aimpoint Comp Series Sights

The A.R.M.S. #22M68 Throw Lever Ring is a really nice quick release mount for the Aimpoint CompM2, CompML2, CompM3, CompML3, and CompC and CompC3 series of Aimpoint sights.

A spacer is also available for the #22M68

GG&G Standard Aimpoint Ring

The GG&G Standard Aimpoint ring is made to mount any M-Series Aimpoint sight to a picatinny rail. Made of 6061 T6 billet aluminum and and finished Type III hard-coat anodized black, the Standard Ring is a type of quick release ring that is sturdy, good looking, and light weight. Includes an extra-battery compartment right in the mount. In order to co-witness backup iron sights and to clear the front sight on an M-16 or AR-15 flat top family of rifles and carbines, this ring should be used with a rail system like the GG&G FIRE rail, standard or scout length, or for example, the Rock River rail system on the Rock River carbines. We also sell a small "rail" that is basically about the same width of the Standard Ring and acts as a spacer.

GG&G Cantilever Aimpoint Ring

Newly redesigned, the GG&G Cantilever Aimpoint Ring puts the Aimpoint M-Series sight at exactly the right height to clear the front sight and to co-witness with standard rear BUIS systems. No rail system or spacer required. The GG&G Cantilever Aimpoint Ring also moves the Aimpoint sight far enough forward (the cantilever part) to allow the use of Night Vision or the Aimpoint 3X magnifier mounted behind the Aimpoint. The Cantilever Aimpoint Ring also has the insulated spare battery compartment. The mount attaches to the Picatinny rail with a single captivated thumbnut and spring activated sidebar, which aides in installing the mount, especially in low light conditions.

GG&G AccuCam Cantilever Aimpoint Ring

A special version of the GG&G Cantilever Aimpoint Ring, it comes with a built in AccuCam quick release system. All the standard features of the GG&G Cantilever Aimpoint Ring with the ability to very quickly and repeatably detach and attach the Cantilever Ring (with Sight) to the firearm. The Ring the body is manufactured from solid billet 6061 T6 aluminum, six cap screws firmly hold the Aimpoint in place, and the insulated waterproof spare battery compartment with spare battery cap keeps the spare battery handy. (Shown with Aimpoint Sight. Sight not included).

Aimpoint Spacer for QRP and QRW Quick Release Mounts and 3x Magnifier TwistMount

The Aimpoint QRP/QRW Spacer installs into the QRP or QRW Quick Release mount or 3x Magnifier TwistMount and raises the sight a small amount when the rifle's iron sights are generally higher than the Aimpoint Sight's view through the lense. This helps with co-witnessing the Aimpoint Sight with the firearm's iron sighting system.

A.R.M.S. Standard Spacer for #22M68 Throw Lever Ring

The A.R.M.S. Spacer for the A.R.M.S. #22M68 Throw Lever Ring raises the Aimpoint sight up 1/2" to allow it to co-witness with the iron sights of an M4-style carbine or flat top AR15 without rail.

Aimpoint Tenebraex Killflash ARD for Aimpoint Comp Series

The Killflash ARD is an important accessory for the Aimpoint Comp series. This honeycomb twist-on "shield" blocks reflections off the front of the Aimpoint so that you are not seen or your position given away by light reflecting off the front of the Aimpoint sight.

Aimpoint Double Battery Module for the CompM Series (Now Aimpoint Number 11430)

This has been replaced by Aimpoint 11430 Double Battery Kit and that is what you will get the 11430 or 10976 depending on availability. Most likely the 11430.

The double battery module allows you to store an extra battery on the sight so you always have an extra one on hand. For all CompM/ML series sights including CompM2/ML2 and CompM3/ML3 sights.

Duracell Retail DL 1/3N Lithium Battery for Aimpoint Sights

Replacement battery for your CAT or ACET Aimpoint Sight. Retail carded.

Packaging shown at left may vary from current Duracell retail packaging.

Sanyo Carded 1/3N Lithium Battery for Aimpoint Sights

Replacement battery for your CET or ACET Aimpoint Sight. Retail carded.

Sanyo Bulk 1/3N Lithium Battery for Aimpoint Sights

Replacement battery for your CET or ACET Aimpoint Sight. Bulk packed.

Aimpoint Bikini Style Rubber Lens Cover for Comp M Series

Rubber Bikini Style Lens Cover (front and back) for the Comp M2/ML2 and Comp M3/ML3. Requires the QRP or QRW mount, to which it is attached.

Aimpoint Outer Rubber Cover "Dark Earth Brown" for Aimpoint Comp Series Sights

Rubber cover for Aimpoint Comp Series sights. This protects your sight and adds some camo stealth to it... Dark Earth Brown.

Aimpoint Outer Rubber Cover "Black" for Aimpoint Comp Series Sights

Rubber cover for Aimpoint Comp Series sights. This protects your sight and adds some camo stealth to it... Black..

Aimpoint Comp M2 Red Dot Reflex CET Sight

The Aimpoint CompM2 Red Dot reflex CET sight is durable, dependable, and has up to 10,000 hours battery life. In use worldwide by soldiers, police, and sportsmen, it has proven its worth. The CompM2 has 4 Night Vision Device (NVD) settings and 6 Daylight settings (one extra bright). There is no off switch and battery life on the lowest NVD setting is up to 100,000 hours.

We are a Retail and Law Enforcement/Government Authorized Aimpoint dealer.

Aimpoint Comp ML2 Red Dot Reflex CET Sight

The Aimpoint CompML2 Red Dot reflex CET sight is durable, dependable, and has up to 10000 hours battery life. In use worldwide by soldiers, police, and sportsmen, it has proven its worth. The CompML2 has 9 Daylight settings (one extra bright) and an Off setting.

We are a Retail and Law Enforcement/Government Authorized Aimpoint dealer.

Aimpoint Comp M3 Red Dot Reflex ACET Sight 4 MOA

The Aimpoint CompM3 is an evolution of the CompM2 Red Dot reflex CET sight, and is durable, dependable, and has up to 50,000 hours battery life. The CompM3 has 4 Night Vision Device (NVD) settings and 6 Daylight settings (one extra bright). There is no off switch and battery life on the lowest NVD setting is up to 500,000 hours.

We are a Retail and Law Enforcement/Government Authorized Aimpoint dealer.

THIS IS A SPECIAL ORDER ITEM. After you place your order, we will order it from Aimpoint.

Aimpoint Comp M3 Red Dot Reflex ACET Sight 2 MOA

The Aimpoint CompM3 is an evolution of the CompM2 Red Dot reflex CET sight, and is durable, dependable, and has up to 50,000 hours battery life. The CompM3 has 4 Night Vision Device (NVD) settings and 6 Daylight settings (one extra bright). There is no off switch and battery life on the lowest NVD setting is up to 500,000 hours.

Shown with optional brown earth colored rubber cover. The Comp M3 comes with a black rubber cover. Due to the vagaries of color reproduction on individual computers, the brown color shown may not be exact.

We are a Retail and Law Enforcement/Government Authorized Aimpoint dealer.

THIS IS A SPECIAL ORDER ITEM. After you place your order, we will order it from Aimpoint.

Aimpoint Comp ML3 Red Dot Reflex ACET Sight 4 MOA

The Aimpoint CompML3 is an evolution of the CompML2 Red Dot reflex CET sight, and is durable, dependable, and has up to 50,000 hours battery life. In use worldwide by soldiers, police, and sportsmen, it has proven its worth. The CompML3 has 9 Daylight settings (one extra bright) and an Off setting.

We are a Retail and Law Enforcement/Government Authorized Aimpoint dealer.

THIS IS A SPECIAL ORDER ITEM. After you place your order, we will order it from Aimpoint.